Airtic Magnetic Switch CS1-F020-U-J-S-G-M-H Cylinder Limit Magnetic Control Proximity Sensor Second Line

• Customization: Available
• Type: Magnetostrictive Displacement Sensor
• Output Signal Type: Analog Type
• Model NO.: CS1 serise
• Movement: Linear Displacement
• Production Process: Injection
• Material: Thermosetting
• Accuracy Grade: 0.2G
• IP Rating: IP67
• Certification: CE
• Customized: Non-Customized
• Transport Package: Carton
• Specification: conventional
• Trademark: Ordinary and branded
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500000PCS/Year

Product Description

Precautions
1. The two-wire magnetic switch cannot be short-circuited to the power supply. Whether the magnetic switch is mechanical or electronic, the resistance of the two-wire switch itself is very small, which is equivalent to a wire. Direct connection to the power supply will cause a short circuit. The overload current in the circuit will damage the magnetic switch, causing the contacts to melt and normally close, or Burn directly.
2. Please pay attention to the correct polarity when wiring the two-wire magnetic switch. Reverse connection will cause the signal light to not light up. When using the three-wire magnetic switch, pay attention to the wiring must not make mistakes, otherwise it will be easily burnt.
3. The magnetic switch cannot be directly connected to large inductive components (such as motors, large-capacity solenoid valves, etc.). Excessive inductance will generate a large amount of surge current when the circuit is opened or closed, which will burn the magnetic switch. When the magnetic switch is used, the current or voltage should be stable without interference.
4. As a magnetic sensor, the magnetic switch should be ensured that there is no strong magnetism or a large amount of iron filings. Otherwise, the magnetic sensitivity of the magnetic switch will be reduced, resulting in no action or no action, which will reduce the life. If a strong magnetic field must be used, The magnetic switch applied to strong magnetic field should be selected.