○Lubrication-free-oil-impregnated bearings are used and piston rods do not need to be lubricated.
○High temperature resistance-high temperature resistant sealing materials can be used to make the cylinder work normally at a high temperature of 150 degrees (customers need to customize with our company.)
○Durability-The cylinder body, front and rear covers have undergone color EP coating oxidation treatment, which not only has abrasion resistance, corrosion resistance and durability, but also has a compact and exquisite appearance.
○Various installation forms-A variety of installation accessories are available.
Cylinder is the most important executive element, it converts the pressure energy of compressed air into mechanical energy, and the drive mechanism performs linear reciprocating, swinging and rotating motion.
Notes for use
(1) The normal working conditions of the cylinder: the medium and ambient temperature are generally -20 to 80 ºC, and the working pressure is generally 0.1 to 1.0 MPa. See the technical parameter table of various cylinders for specific conditions.
(2) Before installation, the test should be carried out at 1.5 times the working pressure, and there should be no air leakage.
(3) An oil mist device should be installed at the inlet of the installed air source to facilitate lubrication during work. Reasonable lubrication of the cylinder is extremely important. It often creeps due to poor lubrication and even fails to work normally.
(4) When installing, pay attention to the direction of action. The piston rod is not allowed to bear eccentric load or lateral load.
(5) When the load changes in the stroke, a cylinder with sufficient output power should be used, and a buffer device should be added.
(6) Do not use the full stroke, especially when the piston rod is extended, do not make the piston collide with the cylinder head. Otherwise it is easy to cause damage to parts such as piston and cylinder head.
The size of the cylinder force:
Determine the thrust and pull on the piston rod according to the force required for the work. Therefore, when selecting a cylinder, the output force of the cylinder should have a little margin. If the cylinder diameter is selected small, the output force is not enough, and the cylinder cannot work normally; but the cylinder diameter is too large, not only makes the equipment bulky and high cost, but also increases the gas consumption and causes energy waste. When designing the fixture, try to use a booster mechanism to reduce the size of the cylinder.
1 s'il vous plaît soin les détails des produits à notre site web, tout confondre s'il vous plaît nous contacter livraison ou appel.Grande quantité d'achat, S'il vous plaît contacter notre service en ligne à demander plus économique manière d'expédition ou discuter la plus jolie prix
2 après ordre d'endroit, s'il vous plaît soin le message de votre mobile, nous pouvons vous contacter au sujet des détails de l'adresse de livraison, déclarent la valeur, Facture valeur ou autres.
3 s'il vous plaît n'oubliez pas de nous donner cinq étoiles éloges, votre approbation est la plus grande affirmation et soutien pour nos produits
){kind=link}